Overview: This is the bezel which sits behind the door handle lever it's a very
common part to find cracked the crack generally progresses and ends
up breaking the bezel in half or a number of pieces, given the location it's
usually one of the first parts you/a passenger notices when you exit the vehicle, tidy up your interior with one or a pair (see other
listing for LH side) of these genuine bezels.
Suitability: Will suit all year models of SW20.
Fitment: These door bezels are retained by 1 x phillips head screw and two nodules at the top and bottom of the bezel itself,
1) Unscrew the phillips head screw
2) Use a flat head screw driver (or trim removing tool) wrapped in electrical or masking tape to avoid damaging your door card and start by levering downwards at the top of your existing door bezel whist applying some outwards pressure once the top nodule is out of its retainer repeat for the bottom nodule you may find it is easier to lever each a little at a time unit the bezel pops out
Pull the door handle forward and slide the new bezel into place seating
the nodules in their retaining holes, re-fit and tighten the retaining
screw DO NOT OVER-TIGHTEN the screw! this is generally what causes them
As with all Toyota parts if you would like to
maintain a 12 month warranty on the parts Toyota require genuine parts to be
fitted by an Authorised Toyota technician.
*Please note: photos are for illustrative purpose only the majority of the time they are of the exact item you will receive.
Door Cup Bezel Surround RH BLACK - Genuine Toyota - SW20 - NEW
- Brand: Toyota
- Product Code: 31008
- Availability: In Stock
Tags: Door, Cup, Bezel, Surround, handle, door handle, lever, plastic, door inside, OEM, MR2, 31008