International buyers (outside of Australia) please contact us before purchasing.
Also note. $100 discount available for in-person collection (Bendigo, Victoria) Please contact us directly if you'd like to do this.

Overview: This is a aftermarket front bumper lip for the Toyota SW20. This is a replacement to the original front bumper lip.

If you are familiar with the SW20 body styling the early model SW20's were fitted with a two piece front bumper spoiler/lip from the factory after which they were fitted with a larger one piece front lip.

This aftermarket front spoiler is not much lower than the stock spoiler however has the largest increase in the angle and extension which should push high pressure air upwards and help with front end down force the most out of the spoilers/lips we stock.

Colour: Black polyurethane, for those of you who aren't familiar with polyurethane it's basically the same material the factory front bumper is made out of and unlike fiberglass
is very flexible and forgiving on speed humps etc.
The finish quality is high and it can be left unpainted or the lip can be painted to match the vehicle.

Dimensions: Approximately: 1630mm x 540mm X 80mm

Weight: Approximately: 910g

(Note, specs can change slightly between production runs)

Fitment: This front lip is designed to fit the factory front bumper. If you have a one piece style lip already fitted you can reuse your original mounting hardware and brackets and simply replace the lip with this one, this unit already has the factory holes (partially) drilled which we have cross referenced with the original ones and they are pretty accurate.

Due to the nature of polyurethane your original front bumper may have changed shape slightly over time/ the lip may not be perfect so the manufacturer recommends leaving the front lip in the sun for 1 hour to heat the polyurethane before fitment to ensure it conforms to the correct shape.

We recommend temporarily affixing the lip to the bumper with g-clamps etc. and then finalise drilling against the holes in your bumper.

We have now had a number of customers fit these front lips and have had good reports however a few customers have needed to re-position some holes in the lip to fit to their front bumper 100%,

Keep in mind if you have the earlier two piece style front lip currently fitted you may reuse the side mount brackets but not the front one, you may use the included hardware along the front.

Although a little bit of care needs to be taken during installation we have found these to be the best quality aftermarket polyurethane front lips currently available, we carry two other styles please see our other listings below.

Suitability: This front lip will suit all year model and market variants of SW20 with factory front bumpers fitted.

Delivery: Delivery is included via courier in the item price Australia wide to all major capitals and major regional areas if you live in outback Australia or in a remote location that freight is excessive (you'll know if you're from one of these places!) please contact us first, Item is sent from Victoria, Australia.
International buyer please note the item can be sent out of Australia however please contact us for a quote, the freight is often excessive due to the item size however it can be done.