Overview: This is a aftermarket front bumper lip for the Toyota SW20. This is a replacement to the original front bumper lip.
If you are familiar with the SW20 body styling the early model SW20's were fitted with a two piece front bumper spoiler/lip from the factory after which they were fitted with a larger one piece front lip.
This aftermarket front spoiler is not much lower than the stock spoiler however has the largest increase in the angle and extension which should push high pressure air upwards and help with front end down force the most out of the spoilers/lips we stock.
Colour: Black polyurethane, for those of you who aren't familiar with polyurethane it's basically the same material the factory front bumper is made out of and unlike fiberglass
is very flexible and forgiving on speed humps etc.
Although unpainted the finish quality is high and quite shiny it can be left unpainted and (in our opinion) looks equally as good as the early model original front lip finish if not better or the lip can be painted to match the vehicle.
Dimensions: Approximately: 1630mm x 540mm X 80mm
Weight: Approximately: 910g
Fitment: This front lip is designed to fit the factory front bumper. If you have a one piece style lip already fitted you can reuse your original mounting hardware and brackets and simply replace the lip with this one, this unit already has the factory holes (partially) drilled which we have cross referenced with the original ones and they are pretty accurate.
Due to the nature of polyurethane your original front bumper may have changed shape slightly over time/ the lip may not be perfect so the manufacturer recommends leaving the front lip in the sun for 1 hour to heat the polyurethane before fitment to ensure it conforms to the correct shape.
We recommend temporarily affixing the lip to the bumper with g-clamps etc. and then finalise drilling against the holes in your bumper.
We have now had a number of customers fit these front lips and have had good reports however a few customers have needed to re-position some holes in the lip to fit to their front bumper 100%,
Keep in mind if you have the earlier two piece style front lip currently fitted you may reuse the side mount brackets but not the front one, you may use the included hardware along the front.
Although a little bit of care needs to be taken during installation we have found these to be the best quality aftermarket polyurethane front lips currently available, we carry two other styles please see our other listings below.
We would love for someone to put together a fitment video for us to use on our website to help other MR2 owners with fitment in return for the video we will offer some monetary compensation. Also we would also like more photos of this lip fitted to your MR2 if you send us some photos when the lip is fitted/painted that we can use we will send you something useful for your MR2 in return.
Suitability: This front lip will suit all year model and market variants of SW20 with factory front bumpers fitted.
*Please note: photos are for illustrative purpose only the majority of the time they are of the exact version of the item you will receive.
Front Polyurethane Lower Lip Spoiler - CRUX Style - SW20 - NEW
- Product Code: 31117
- Availability: In Stock
Tags: Front Bumper Polyurethane Lower Lip Spoiler, Front spoiler, front lip cx, cx front lip, cx front spoiler, cx front lower lip, front bumper chin spoiler, front chin spoiler, splitter, front splitter, NEW, MR2, 31117